- UANOG - uanog.one

cisco 6509, PFC2 revision number
by Andrey Nikolaev 03 Jul '08

03 Jul '08

Hi! ктото сталкивался с неполной функциональностью PFC2 точнее не отрабатыванием ingress policer, при ограничении входящего трафика на порт, через небольшой промежуток времени прекращается вообще трафик на порте, ощущение что зажимаются аски... причем на другой такой же железке это не происходит различие в ревижене PFC2 в неработающей версии стоит Mod Sub-Module Model Serial Hw Status --- --------------------------- --------------- --------------- ------- ------- 1 Policy Feature Card 2 WS-F6K-PFC2 SAD052700BJ 1.4 Ok 1 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 SAD0521065H 1.2 Ok -- andy(a)cris.ua AN1035-RIPE

1 0

Re[10]: [uanog] Странности с SNMP у cisco 2610
by Artem Grishin 02 Jul '08

02 Jul '08

Здравствуйте, Vladimir. Вы писали 2 июля 2008 г., 14:56:16: > а какая версия софта? flash:c2600-j1s3-mz.122-13.T1.bin > 2008/7/2 Artem Grishin <gas(a)zol.zp.ua>: >> Здравствуйте, Vladimir. >> >> Вы писали 2 июля 2008 г., 14:41:46: >> >>> Ага, ну значит переменная таки есть и действительно заполнена >>> значением 6. Это означает - >> >>> ifOperStatus OBJECT-TYPE >>> SYNTAX INTEGER { >>> up(1), -- ready to pass packets >>> down(2), >>> testing(3), -- in some test mode >>> unknown(4), -- status can not be determined >>> -- for some reason. >>> dormant(5), >>> notPresent(6), -- some component is missing >>> lowerLayerDown(7) -- down due to state of >>> -- lower-layer interface(s) >>> } >>> MAX-ACCESS read-only >>> STATUS current >>> DESCRIPTION >>> "The current operational state of the interface. The >>> testing(3) state indicates that no operational packets can >>> be passed. If ifAdminStatus is down(2) then ifOperStatus >>> should be down(2). If ifAdminStatus is changed to up(1) >>> then ifOperStatus should change to up(1) if the interface is >>> ready to transmit and receive network traffic; it should >>> change to dormant(5) if the interface is waiting for >>> external actions (such as a serial line waiting for an >>> incoming connection); it should remain in the down(2) state >>> if and only if there is a fault that prevents it from going >>> to the up(1) state; it should remain in the notPresent(6) >>> state if the interface has missing (typically, hardware) >>> components." >>> ::= { ifEntry 8 } >> >>> поэтому следующим шагом имеет смысл посмотреть на состояние интерфейса >>> - sh int ... >> >> Вот собсно приводил: >> >>>>>>>>>>> cisco2610#sh int se 1/6 >>>>>>>>>>> Serial1/6 is up, line protocol is up >>>>>>>>>>> Hardware is CD2430 in async mode >>>>>>>>>>> Description: test >>>>>>>>>>> Internet address is 10.66.225.17/30 >>>>>>>>>>> MTU 1500 bytes, BW 115 Kbit, DLY 100000 usec, >>>>>>>>>>> reliability 255/255, txload 1/255, rxload 1/255 >>>>>>>>>>> Encapsulation PPP, LCP Open >>>>>>>>>>> Open: IPCP, loopback not set >>>>>>>>>>> DTR is pulsed for 5 seconds on reset >>>>>>>>>>> Last input 00:00:03, output 00:00:00, output hang never >>>>>>>>>>> Last clearing of "show interface" counters 00:08:48 >>>>>>>>>>> Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 >>>>>>>>>>> Queueing strategy: weighted fair >>>>>>>>>>> Output queue: 0/1000/64/0 (size/max total/threshold/drops) >>>>>>>>>>> Conversations 0/1/16 (active/max active/max total) >>>>>>>>>>> Reserved Conversations 0/0 (allocated/max allocated) >>>>>>>>>>> Available Bandwidth 86 kilobits/sec >>>>>>>>>>> 5 minute input rate 0 bits/sec, 0 packets/sec >>>>>>>>>>> 5 minute output rate 0 bits/sec, 0 packets/sec >>>>>>>>>>> 184 packets input, 7421 bytes, 0 no buffer >>>>>>>>>>> Received 0 broadcasts, 0 runts, 0 giants, 0 throttles >>>>>>>>>>> 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort >>>>>>>>>>> 170 packets output, 7837 bytes, 0 underruns >>>>>>>>>>> 0 output errors, 0 collisions, 1 interface resets >>>>>>>>>>> 0 output buffer failures, 0 output buffers swapped out >>>>>>>>>>> 0 carrier transitions >>>>>>>>>>> -- Не важно, веришь ли ты в бога, важно верит ли он в тебя... SUI-UANIC GAS-RIPE ______________________________________________ --== Omega Group ==--

2 3

Re[6]: [uanog] Странности с SNMP у cisco 2610
by Artem Grishin 02 Jul '08

02 Jul '08

Здравствуйте, Vladimir. Вы писали 2 июля 2008 г., 13:08:17: > это из IOS CLI надо запустить, в enable mode: > snmp get v2c 172.16.51.1 public oid 1.3.6.1.2.1.2.2.1.8.11 cisco2610 #snmp get v2c 10.10.10.1 public oid 1.3.6.1.2.1.2.2.1.8.11 SNMP Response: reqid 7, errstat 0, erridx 0 ifEntry.8.11 = 6 > проверь, чтобы последний октет (в строке выше - 11) соответствовал > тому ifIndex, который не отзывается на snmpget > 2008/7/2 Artem Grishin <gas(a)zol.zp.ua>: >> Здравствуйте, Vladimir. >> >> Вы писали 2 июля 2008 г., 12:37:36: >> >>> я у себя попробовал вот так - >> >>> #snmp get v2c 172.16.51.1 public oid 1.3.6.1.2.1.2.2.1.8.4 >> >> У вас наверное другой пакет стоит SNMP, у меня нет отдельно >> команды snmp. >> >> $ snmpget -v2c -c public cisco2610 1.3.6.1.2.1.2.2.1.8.11 >> IF-MIB::ifOperStatus.11 = INTEGER: notPresent(6) >> >> >>> тут 1.3.6.1.2.1.2.2.1.8 - ifOperStatus >>> и .4 - ifIndex >> >>> #snmp get v2c 172.16.51.1 public oid 1.3.6.1.2.1.2.2.1.2.4 >>> SNMP Response: reqid 22, errstat 0, erridx 0 >>> ifDescr.4 = GigabitEthernet2/0 >> >>> полученный по команде: >> >>> #show snmp mib ifmib ifindex >>> GigabitEthernet2/0: Ifindex = 4 >>> FastEthernet0/1: Ifindex = 2 >>> Null0: Ifindex = 5 >>> GigabitEthernet1/0: Ifindex = 3 >>> FastEthernet0/0: Ifindex = 1 >> >> >> >>> 2008/7/2 Vladimir Litovka <doka.ua(a)gmail.com>: >>>> попробуй посмотреть командой >>>> >>>> snmp get v2c <local ip> <community> oid <x.x.x.x...> >>>> >>>> и сбрось результат >>>> >>>> >>>> 2008/7/2 Artem Grishin <gas(a)zol.zp.ua>: >>>>> Здравствуйте, Vladimir. >>>>> >>>>> Вы писали 2 июля 2008 г., 11:36:19: >>>>> >>>>>> а snmpwalk по этой ветке что показывает? >>>>> >>>>> тоже самое, интерфейсы опрашиваются в полном обьеме. >>>>> >>>>> IF-MIB::ifDescr.1 = STRING: FastEthernet0/0 >>>>> IF-MIB::ifDescr.2 = STRING: Serial0/0 >>>>> IF-MIB::ifDescr.3 = STRING: FastEthernet0/1 >>>>> IF-MIB::ifDescr.4 = STRING: Serial0/1 >>>>> IF-MIB::ifDescr.5 = STRING: Serial1/0 >>>>> IF-MIB::ifDescr.6 = STRING: Serial1/1 >>>>> IF-MIB::ifDescr.7 = STRING: Serial1/2 >>>>> IF-MIB::ifDescr.8 = STRING: Serial1/3 >>>>> IF-MIB::ifDescr.9 = STRING: Serial1/4 >>>>> IF-MIB::ifDescr.10 = STRING: Serial1/5 >>>>> IF-MIB::ifDescr.11 = STRING: Serial1/6 >>>>> IF-MIB::ifDescr.12 = STRING: Serial1/7 >>>>> IF-MIB::ifDescr.13 = STRING: Null0 >>>>> IF-MIB::ifDescr.25 = STRING: Tunnel2 >>>>> IF-MIB::ifDescr.26 = STRING: Tunnel4 >>>>> IF-MIB::ifDescr.28 = STRING: Serial0/0.1 >>>>> IF-MIB::ifDescr.33 = STRING: Serial1/1.3 >>>>> IF-MIB::ifDescr.34 = STRING: Serial1/2.1 >>>>> IF-MIB::ifDescr.35 = STRING: Serial1/3.1 >>>>> IF-MIB::ifDescr.36 = STRING: Serial1/5.1 >>>>> IF-MIB::ifDescr.37 = STRING: Serial1/7.1 >>>>> IF-MIB::ifDescr.38 = STRING: Virtual-Access1 >>>>> IF-MIB::ifDescr.42 = STRING: Tunnel0 >>>>> IF-MIB::ifDescr.47 = STRING: Serial1/4.1 >>>>> IF-MIB::ifDescr.50 = STRING: FastEthernet0/0.3-802.1Q vLAN subif >>>>> IF-MIB::ifDescr.53 = STRING: FastEthernet0/0.5-802.1Q vLAN subif >>>>> IF-MIB::ifDescr.56 = STRING: FastEthernet0/0.7-802.1Q vLAN subif >>>>> IF-MIB::ifAdminStatus.1 = INTEGER: up(1) >>>>> IF-MIB::ifAdminStatus.2 = INTEGER: up(1) >>>>> IF-MIB::ifAdminStatus.3 = INTEGER: down(2) >>>>> IF-MIB::ifAdminStatus.4 = INTEGER: down(2) >>>>> IF-MIB::ifAdminStatus.5 = INTEGER: down(2) >>>>> IF-MIB::ifAdminStatus.6 = INTEGER: up(1) >>>>> IF-MIB::ifAdminStatus.7 = INTEGER: down(2) >>>>> IF-MIB::ifAdminStatus.8 = INTEGER: up(1) >>>>> IF-MIB::ifAdminStatus.9 = INTEGER: up(1) >>>>> IF-MIB::ifAdminStatus.10 = INTEGER: up(1) >>>>> IF-MIB::ifAdminStatus.11 = INTEGER: up(1) >>>>> IF-MIB::ifAdminStatus.12 = INTEGER: up(1) >>>>> IF-MIB::ifAdminStatus.13 = INTEGER: up(1) >>>>> IF-MIB::ifAdminStatus.25 = INTEGER: up(1) >>>>> IF-MIB::ifAdminStatus.26 = INTEGER: up(1) >>>>> IF-MIB::ifAdminStatus.28 = INTEGER: up(1) >>>>> IF-MIB::ifAdminStatus.33 = INTEGER: up(1) >>>>> IF-MIB::ifAdminStatus.34 = INTEGER: down(2) >>>>> IF-MIB::ifAdminStatus.35 = INTEGER: up(1) >>>>> IF-MIB::ifAdminStatus.36 = INTEGER: up(1) >>>>> IF-MIB::ifAdminStatus.37 = INTEGER: up(1) >>>>> IF-MIB::ifAdminStatus.38 = INTEGER: up(1) >>>>> IF-MIB::ifAdminStatus.42 = INTEGER: up(1) >>>>> IF-MIB::ifAdminStatus.47 = INTEGER: up(1) >>>>> IF-MIB::ifAdminStatus.50 = INTEGER: up(1) >>>>> IF-MIB::ifAdminStatus.53 = INTEGER: up(1) >>>>> IF-MIB::ifAdminStatus.56 = INTEGER: up(1) >>>>> IF-MIB::ifOperStatus.1 = INTEGER: up(1) >>>>> IF-MIB::ifOperStatus.2 = INTEGER: down(2) >>>>> IF-MIB::ifOperStatus.3 = INTEGER: down(2) >>>>> IF-MIB::ifOperStatus.4 = INTEGER: down(2) >>>>> IF-MIB::ifOperStatus.5 = INTEGER: down(2) >>>>> IF-MIB::ifOperStatus.6 = INTEGER: down(2) >>>>> IF-MIB::ifOperStatus.7 = INTEGER: down(2) >>>>> IF-MIB::ifOperStatus.8 = INTEGER: down(2) >>>>> IF-MIB::ifOperStatus.9 = INTEGER: down(2) >>>>> IF-MIB::ifOperStatus.10 = INTEGER: up(1) >>>>> IF-MIB::ifOperStatus.11 = INTEGER: notPresent(6) >>>>> IF-MIB::ifOperStatus.12 = INTEGER: up(1) >>>>> IF-MIB::ifOperStatus.13 = INTEGER: up(1) >>>>> IF-MIB::ifOperStatus.25 = INTEGER: up(1) >>>>> IF-MIB::ifOperStatus.26 = INTEGER: up(1) >>>>> IF-MIB::ifOperStatus.28 = INTEGER: down(2) >>>>> IF-MIB::ifOperStatus.33 = INTEGER: down(2) >>>>> IF-MIB::ifOperStatus.34 = INTEGER: down(2) >>>>> IF-MIB::ifOperStatus.35 = INTEGER: down(2) >>>>> IF-MIB::ifOperStatus.36 = INTEGER: up(1) >>>>> IF-MIB::ifOperStatus.37 = INTEGER: up(1) >>>>> IF-MIB::ifOperStatus.38 = INTEGER: notPresent(6) >>>>> IF-MIB::ifOperStatus.42 = INTEGER: up(1) >>>>> IF-MIB::ifOperStatus.47 = INTEGER: down(2) >>>>> IF-MIB::ifOperStatus.50 = INTEGER: up(1) >>>>> IF-MIB::ifOperStatus.53 = INTEGER: up(1) >>>>> IF-MIB::ifOperStatus.56 = INTEGER: up(1) >>>>> >>>>> >>>>>> 2008/7/2 Artem Grishin <gas(a)zol.zp.ua>: >>>>>>> Здравствуйте, Uanog. >>>>>>> >>>>>>> Обнаружил странную вещь: >>>>>>> >>>>>>> При опросе одного порта не отсутствует его состояние: >>>>>>> >>>>>>> $snmpget -v1 -c public cisco2610 ifOperStatus.11 >>>>>>> IF-MIB::ifOperStatus.11 = INTEGER: notPresent(6) >>>>>>> >>>>>>> опрос соседнего показывает все нормально: >>>>>>> >>>>>>> $ snmpget -v1 -c public cisco2610 ifOperStatus.10 >>>>>>> IF-MIB::ifOperStatus.10 = INTEGER: up(1) >>>>>>> >>>>>>> Заведомо отсутствующий порт: >>>>>>> $ snmpget -v1 -c public cisco2160 ifOperStatus.89 >>>>>>> Error in packet >>>>>>> Reason: (noSuchName) There is no such variable name in this MIB. >>>>>>> Failed object: IF-MIB::ifOperStatus.89 >>>>>>> >>>>>>> cisco2610#sh int se 1/6 >>>>>>> Serial1/6 is up, line protocol is up >>>>>>> Hardware is CD2430 in async mode >>>>>>> Description: test >>>>>>> Internet address is 10.66.225.17/30 >>>>>>> MTU 1500 bytes, BW 115 Kbit, DLY 100000 usec, >>>>>>> reliability 255/255, txload 1/255, rxload 1/255 >>>>>>> Encapsulation PPP, LCP Open >>>>>>> Open: IPCP, loopback not set >>>>>>> DTR is pulsed for 5 seconds on reset >>>>>>> Last input 00:00:03, output 00:00:00, output hang never >>>>>>> Last clearing of "show interface" counters 00:08:48 >>>>>>> Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 >>>>>>> Queueing strategy: weighted fair >>>>>>> Output queue: 0/1000/64/0 (size/max total/threshold/drops) >>>>>>> Conversations 0/1/16 (active/max active/max total) >>>>>>> Reserved Conversations 0/0 (allocated/max allocated) >>>>>>> Available Bandwidth 86 kilobits/sec >>>>>>> 5 minute input rate 0 bits/sec, 0 packets/sec >>>>>>> 5 minute output rate 0 bits/sec, 0 packets/sec >>>>>>> 184 packets input, 7421 bytes, 0 no buffer >>>>>>> Received 0 broadcasts, 0 runts, 0 giants, 0 throttles >>>>>>> 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort >>>>>>> 170 packets output, 7837 bytes, 0 underruns >>>>>>> 0 output errors, 0 collisions, 1 interface resets >>>>>>> 0 output buffer failures, 0 output buffers swapped out >>>>>>> 0 carrier transitions >>>>>>> >>>>>>> >>>>>>> Что это может быть, как это пофиксить? >>>>>>> >>>>>>> -- >>>>>>> Не важно, веришь ли ты в бога, важно верит ли он в тебя... >>>>>>> >>>>>>> SUI-UANIC >>>>>>> GAS-RIPE >>>>>>> ______________________________________________ >>>>>>> --== Omega Group ==-- >>>>>>> >>>>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> Не важно, веришь ли ты в бога, важно верит ли он в тебя... >>>>> >>>>> SUI-UANIC >>>>> GAS-RIPE >>>>> ______________________________________________ >>>>> --== Omega Group ==-- >>>>> >>>>> >>>> >>>> >>>> >>>> -- >>>> >>>> /doka >>>> >> >> >> >> >> >> >> -- >> Не важно, веришь ли ты в бога, важно верит ли он в тебя... >> >> SUI-UANIC >> GAS-RIPE >> ______________________________________________ >> --== Omega Group ==-- >> >> -- Не важно, веришь ли ты в бога, важно верит ли он в тебя... SUI-UANIC GAS-RIPE ______________________________________________ --== Omega Group ==--

2 2

Re[2]: [uanog] Странности с SNMP у cisco 2610
by Artem Grishin 02 Jul '08

02 Jul '08

Здравствуйте, Andrey. Вы писали 2 июля 2008 г., 14:00:41: > Hi! > On Wed, Jul 02, 2008 at 13:53 +0300, Artem Grishin wrote: >> Здравствуйте, Andrey. >> >> Вы писали 2 июля 2008 г., 13:31:34: >> >> > Hi! >> >> > On Wed, Jul 02, 2008 at 11:23 +0300, Artem Grishin wrote: >> >> >> Здравствуйте, Uanog. >> >> >> >> Обнаружил странную вещь: >> >> >> >> При опросе одного порта не отсутствует его состояние: >> >> >> >> $snmpget -v1 -c public cisco2610 ifOperStatus.11 >> >> IF-MIB::ifOperStatus.11 = INTEGER: notPresent(6) >> >> >> >> опрос соседнего показывает все нормально: >> >> > А вы уверены, что именно .11 и .10 ? >> > snmpwalk -v1 -c public cisco2610 ifdescr >> >> IF-MIB::ifDescr.10 = STRING: Serial1/5 >> IF-MIB::ifDescr.11 = STRING: Serial1/6 >> >> IF-MIB::ifAdminStatus.10 = INTEGER: up(1) >> IF-MIB::ifAdminStatus.11 = INTEGER: up(1) >> >> IF-MIB::ifOperStatus.10 = INTEGER: up(1) >> IF-MIB::ifOperStatus.11 = INTEGER: notPresent(6) > А остальные serial-ы тоже в Async mode ? Нет кстати, 10 - синхронный, 11 асинхронный. >> >> > что рассказывает? >> >> >> >> >> $ snmpget -v1 -c public cisco2610 ifOperStatus.10 >> >> IF-MIB::ifOperStatus.10 = INTEGER: up(1) >> >> >> >> Заведомо отсутствующий порт: >> >> $ snmpget -v1 -c public cisco2160 ifOperStatus.89 >> >> Error in packet >> >> Reason: (noSuchName) There is no such variable name in this MIB. >> >> Failed object: IF-MIB::ifOperStatus.89 >> >> >> >> >> >> Что это может быть, как это пофиксить? >> >> >> >> >> >> -- >> Не важно, веришь ли ты в бога, важно верит ли он в тебя... >> >> SUI-UANIC >> GAS-RIPE >> ______________________________________________ >> --== Omega Group ==-- -- Не важно, веришь ли ты в бога, важно верит ли он в тебя... SUI-UANIC GAS-RIPE ______________________________________________ --== Omega Group ==--

2 1

Странности с SNMP у cisco 2610
by Artem Grishin 02 Jul '08

02 Jul '08

Здравствуйте, Uanog. Обнаружил странную вещь: При опросе одного порта не отсутствует его состояние: $snmpget -v1 -c public cisco2610 ifOperStatus.11 IF-MIB::ifOperStatus.11 = INTEGER: notPresent(6) опрос соседнего показывает все нормально: $ snmpget -v1 -c public cisco2610 ifOperStatus.10 IF-MIB::ifOperStatus.10 = INTEGER: up(1) Заведомо отсутствующий порт: $ snmpget -v1 -c public cisco2160 ifOperStatus.89 Error in packet Reason: (noSuchName) There is no such variable name in this MIB. Failed object: IF-MIB::ifOperStatus.89 cisco2610#sh int se 1/6 Serial1/6 is up, line protocol is up Hardware is CD2430 in async mode Description: test Internet address is 10.66.225.17/30 MTU 1500 bytes, BW 115 Kbit, DLY 100000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation PPP, LCP Open Open: IPCP, loopback not set DTR is pulsed for 5 seconds on reset Last input 00:00:03, output 00:00:00, output hang never Last clearing of "show interface" counters 00:08:48 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/16 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 86 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 184 packets input, 7421 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 170 packets output, 7837 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions Что это может быть, как это пофиксить? -- Не важно, веришь ли ты в бога, важно верит ли он в тебя... SUI-UANIC GAS-RIPE ______________________________________________ --== Omega Group ==--

3 4

апач
by Gregory Edigarov 01 Jul '08

01 Jul '08

Всем привет: Дано: FreeBSD-6.2, хостинг-jail apache 2.0.61 из портов, prefork php-4.4.7 из портов-же пых собран модулем. Имеем доставшие уже периодические падения апача. в логах чисто. все остальное на этой тачке, как в этом jail-e, так и в других - работает нормально. Где искать причину? -- With best regards, Gregory Edigarov

7 9

вопрос про кошку
by Gregory Edigarov 01 Jul '08

01 Jul '08

Добрый день еще раз, имем такую диагностику: %% Low on memory; try again later %% Low on memory; try again later %% Low on memory; try again later *Jan 1 13:30:58: %OSPF-5-ADJCHG: Process 1, Nbr 193.124.57.65 on FastEthernet0/ 0 from 2WAY to DOWN, Neighbor Down: Interface down or detached *Jan 1 13:30:58: %OSPF-5-ADJCHG: Process 1, Nbr 193.124.57.68 on FastEthernet0/ 0 from FULL to DOWN, Neighbor Down: Interface down or detached *Jan 1 13:30:58: %OSPF-5-ADJCHG: Process 1, Nbr 193.124.57.77 on FastEthernet0/ 0 from FULL to DOWN, Neighbor Down: Interface down or detached *Jan 1 13:30:58: %OSPF-5-ADJCHG: Process 1, Nbr 193.124.57.88 on FastEthernet0/ 0 from EXSTART to DOWN, Neighbor Down: Interface down or detached %Software-forced reload 13:31:05 KHARKOV Sat Jan 1 2000: Breakpoint exception, CPU signal 23, PC = 0x60 5E51B8 -Traceback= 0x605E51B8 0x605E2EA8 0x600B9040 0x605A9764 0x605A9748 $0 : 00000000, AT : 62F00000, v0 : 63170000, v1 : 62CC0000 a0 : 00000000, a1 : 62F6EC30, a2 : 00000000, a3 : 62CE0000 t0 : 62F00480, t1 : 3400FF01, t2 : 62F00480, t3 : FFFF00FF t4 : 00001F00, t5 : 003F46B4, t6 : FFFFC0FF, t7 : 00000000 s0 : 630A0000, s1 : 00000000, s2 : 62CC0000, s3 : 62CD0000 s4 : 00000000, s5 : 00000000, s6 : 00000000, s7 : 00000000 t8 : 651A1920, t9 : 00000000, k0 : 64D77320, k1 : 605F43B8 gp : 62F07C80, sp : 651A1E98, s8 : 00000000, ra : 605E2EA8 EPC : 605E51B8, ErrorEPC : 605EA3E8, SREG : 3400FF03 MDLO : 00000000, MDHI : 00000000, BadVaddr : 00000020 CacheErr : 00000000, DErrAddr0 : 00000000, DErrAddr1 : 00000000 Cause 01000024 (Code 0x9): Breakpoint exception Writing crashinfo to flash:crashinfo_20000101-113105 13:31:05 KHARKOV Sat Jan 1 2000: Breakpoint exception, CPU signal 23, PC = 0x60 5E51B8 -Traceback= 0x605E51B8 0x605E2EA8 0x600B9040 0x605A9764 0x605A9748 $0 : 00000000, AT : 62F00000, v0 : 63170000, v1 : 62CC0000 a0 : 00000000, a1 : 62F6EC30, a2 : 00000000, a3 : 62CE0000 t0 : 62F00480, t1 : 3400FF01, t2 : 62F00480, t3 : FFFF00FF t4 : 00001F00, t5 : 003F46B4, t6 : FFFFC0FF, t7 : 00000000 s0 : 630A0000, s1 : 00000000, s2 : 62CC0000, s3 : 62CD0000 s4 : 00000000, s5 : 00000000, s6 : 00000000, s7 : 00000000 t8 : 651A1920, t9 : 00000000, k0 : 64D77320, k1 : 605F43B8 gp : 62F07C80, sp : 651A1E98, s8 : 00000000, ra : 605E2EA8 EPC : 605E51B8, ErrorEPC : 605EA3E8, SREG : 3400FF03 MDLO : 00000000, MDHI : 00000000, BadVaddr : 00000020 CacheErr : 00000000, DErrAddr0 : 00000000, DErrAddr1 : 00000000 Cause 01000024 (Code 0x9): Breakpoint exception -Traceback= 0x605E51B8 0x605E2EA8 0x600B9040 0x605A9764 0x605A9748 *Jan 1 13:31:04: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 80.92.224.20 sta rted - reconnection *Jan 1 13:31:05: %SYS-2-MALLOCFAIL: Memory allocation of 3348 bytes failed from 0x60136964, alignment 0 Pool: Processor Free: 2872 Cause: Not enough free memory Alternate Pool: None Free: 0 Cause: No Alternate pool -Process= "ISDN", ipl= 0, pid= 62 -Traceback= 0x604A6B2C 0x605FBA54 0x606046F8 0x6013696C 0x600D2670 0x600DFD50 0x 600D9780 0x600CFE2C 0x600D7490 0x600EBB7C *Jan 1 13:31:05: -Traceback= 0x60136980 0x600D2670 0x600DFD50 0x600D9780 0x600CFE2C 0x600D7490 0x600EBB7C *Jan 1 13:31:05: -Traceback= 0x60136664 0x601369B0 0x600D2670 0x600DFD50 0x600D9780 0x600CFE2C 0x600D7490 0x600EBB7C *Jan 1 13:31:05: %ISDN-3-ISDN_FATAL: ISDN FATAL ERROR: file lif_common.c, function LIF_GetPkt, message: malloc of Buffer failed *Jan 1 13:31:05: %ISDN-3-ISDN_EXIT: malloc of Buffer failed *Jan 1 13:31:05: -Traceback= 0x60136980 0x600C9D50 0x600CA67C *Jan 1 13:31:05: -Traceback= 0x60136664 0x601369B0 0x600C9D50 0x600CA67C *Jan 1 13:31:05: %ISDN-3-ISDN_FATAL: ISDN FATAL ERROR: file lif_common.c, function LIF_GetPkt, message: malloc of Buffer failed *Jan 1 13:31:05: %SCHED-2-EDISMSCRIT: Critical/high priority process ISDN L2 Process may not dismiss. -Process= "ISDN L2 Process", ipl= 0, pid= 171 -Traceback= 0x604A6B2C 0x605D256C 0x6016A9C8 0x600B9BC8 *Jan 1 13:31:09: -Traceback= 0x60136664 0x6005A908 0x6005B198 0x60068988 0x6006D2A0 0x6005C0E8 0x600B8284 *Jan 1 13:31:09: %ISDN-3-ISDN_FATAL: ISDN FATAL ERROR: file CCPRI, function CCPRI_GetOutInfo, message: Unable to get a package info buffer: 0 *Jan 1 13:31:09: -Traceback= 0x60136980 0x600C9D50 0x600CA67C *Jan 1 13:31:09: -Traceback= 0x60136664 0x601369B0 0x600C9D50 0x600CA67C *Jan 1 13:31:09: %ISDN-3-ISDN_FATAL: ISDN FATAL ERROR: file lif_common.c, function LIF_GetPkt, message: malloc of Buffer failed === Flushing messages (13:31:37 KHARKOV Sat Jan 1 2000) === Buffered messages: queue 20 -Process= "CC-API_VCM", ipl= 4, pid= 148 -Traceback= 0x604A6B2C 0x605FA4C0 0x6176DE40 0x6176437C 0x617644C8 0x6176D788 0x6176EE50 0x6177EB94 0x6177F198 0x612AB550 0x612ABBF0 0x612AC320 *Jan 1 13:12:25: -Traceback= 0x61764274 0x61764420 0x6176DE48 0x6176437C 0x617644C8 0x6176D788 0x6176EE50 0x6177EB94 0x6177F198 0x612AB550 0x612ABBF0 0x612AC320Attempt to Unlock/Free something that may not be an AFW instance or has already been freed *Jan 1 13:12:25: -Traceback= 0x6176443C 0x6176DE48 0x6176437C 0x617644C8 0x6176D788 0x6176EE50 0x6177EB94 0x6177F198 0x612AB550 0x612ABBF0 0x612AC320 *Jan 1 13:13:17: %ALIGN-3-SPURIOUS: Spurious memory access made at 0x612A9128 reading 0xF8 *Jan 1 13:13:17: %ALIGN-3-TRACE: -Traceback= 0x612A9128 0x612A9488 0x6176DE30 0x6176437C 0x617644C8 0x6176D788 0x6176EE50 0x6177EB94 *Jan 1 13:13:17: %ALIGN-3-TRACE: -Traceback= 0x612A9134 0x612A9488 0x6176DE30 0x6176437C 0x617644C8 0x6176D788 0x6176EE50 0x6177EB94 *Jan 1 13:13:17: %ALIGN-3-TRACE: -Traceback= 0x605BC644 0x612A9148 0x612A9488 0x6176DE30 0x6176437C 0x617644C8 0x6176D788 0x6176EE50 *Jan 1 13:13:17: %ALIGN-3-TRACE: -Traceback= 0x61C9D42C 0x617F6698 0x617F6F40 0x612A9198 0x612A9488 0x6176DE30 0x6176437C 0x617644C8 *Jan 1 13:13:17: %ALIGN-3-TRACE: -Traceback= 0x61C9D460 0x617F6698 0x617F6F40 0x612A9198 0x612A9488 0x6176DE30 0x6176437C 0x617644C8 *Jan 1 13:13:17: %ALIGN-3-TRACE: -Traceback= 0x612A9308 0x612A9488 0x6176DE30 0x6176437C 0x617644C8 0x6176D788 0x6176EE50 0x6177EB94 *Jan 1 13:13:17: %ALIGN-3-TRACE: -Traceback= 0x605FA404 0x6176DE40 0x6176437C 0x617644C8 0x6176D788 0x6176EE50 0x6177EB94 0x6177F198 *Jan 1 13:30:58: %OSPF-5-ADJCHG: Process 1, Nbr 193.124.57.65 on FastEthernet0/0 from 2WAY to DOWN, Neighbor Down: Interface down or detached *Jan 1 13:30:58: %OSPF-5-ADJCHG: Process 1, Nbr 193.124.57.68 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Jan 1 13:30:58: %OSPF-5-ADJCHG: Process 1, Nbr 193.124.57.77 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Jan 1 13:30:58: %OSPF-5-ADJCHG: Process 1, Nbr 193.124.57.88 on FastEthernet0/0 from EXSTART to DOWN, Neighbor Down: Interface down or detached *Jan 1 13:31:04: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 80.92.224.20 started - reconnection *Jan 1 13:31:05: %SYS-2-MALLOCFAIL: Memory allocation of 3348 bytes failed from 0x60136964, alignment 0 Pool: Processor Free: 2872 Cause: Not enough free memory Alternate Pool: None Free: 0 Cause: No Alternate pool -Process= "ISDN", ipl= 0, pid= 62 -Traceback= 0x604A6B2C 0x605FBA54 0x606046F8 0x6013696C 0x600D2670 0x600DFD50 0x600D9780 0x600CFE2C 0x600D7490 0x600EBB7C *Jan 1 13:31:05: -Traceback= 0x60136980 0x600D2670 0x600DFD50 0x600D9780 0x600CFE2C 0x600D7490 0x600EBB7C *Jan 1 13:31:05: -Traceback= 0x60136664 0x601369B0 0x600D2670 0x600DFD50 0x600D9780 0x600CFE2C 0x600D7490 0x600EBB7C *Jan 1 13:31:05: %ISDN-3-ISDN_FATAL: ISDN FATAL ERROR: file lif_common.c, function LIF_GetPkt, message: malloc of Buffer failed *Jan 1 13:31:05: %ISDN-3-ISDN_EXIT: malloc of Buffer failed *Jan 1 13:31:05: -Traceback= 0x60136980 0x600C9D50 0x600CA67C *Jan 1 13:31:05: -Traceback= 0x60136664 0x601369B0 0x600C9D50 0x600CA67C *Jan 1 13:31:05: %ISDN-3-ISDN_FATAL: ISDN FATAL ERROR: file lif_common.c, function LIF_GetPkt, message: malloc of Buffer failed *Jan 1 13:31:05: %SCHED-2-EDISMSCRIT: Critical/high priority process ISDN L2 Process may not dismiss. -Process= "ISDN L2 Process", ipl= 0, pid= 171 -Traceback= 0x604A6B2C 0x605D256C 0x6016A9C8 0x600B9BC8 *Jan 1 13:31:09: -Traceback= 0x60136664 0x6005A908 0x6005B198 0x60068988 0x6006D2A0 0x6005C0E8 0x600B8284 *Jan 1 13:31:09: %ISDN-3-ISDN_FATAL: ISDN FATAL ERROR: file CCPRI, function CCPRI_GetOutInfo, message: Unable to get a package info buffer: 0 *Jan 1 13:31:09: -Traceback= 0x60136980 0x600C9D50 0x600CA67C *Jan 1 13:31:09: -Traceback= 0x60136664 0x601369B0 0x600C9D50 0x600CA67C *Jan 1 13:31:09: %ISDN-3-ISDN_FATAL: ISDN FATAL ERROR: file lif_common.c, function LIF_GetPkt, message: malloc of Buffer failed Queued messages *** System received an unknown failure *** signal= 0x0, code= 0x0, context= 0x63166700 PC = 0x605ecea8, Cause Reg = 0x103c020, Status Reg = 0x34001b02 Interrupt Ctrl Reg = 0x10001082 System Bootstrap, Version 12.2(1r)1, RELEASE SOFTWARE (fc1) TAC Support: http://www.cisco.com/cgi-bin/ibld/view.pl?i=support Copyright (c) 2001 by cisco Systems, Inc. AS5350 platform with 131072 Kbytes of main memory Self decompressing the image : ########################################################################################################################################################## [OK] %SYS-4-CONFIG_NEWER: Configuration from version 12.4 may not be correctly understood %AAAA-4-SERVUNDEF: The server-group "radius" is not defined. Please define it. %AAAA-4-SERVUNDEF: The server-group "radius" is not defined. Please define it. %AAAA-4-SERVUNDEF: The server-group "radius" is not defined. Please define it. %AAAA-4-SERVUNDEF: The server-group "radius" is not defined. Please define it. %AAAA-4-SERVUNDEF: The server-group "radius" is not defined. Please define it. %SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader. Self decompressing the image : ############################################################################################################################################################################################################ [OK] Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, 5350 Software (C5350-IS-M), Version 12.4(5a), RELEASE SOFTWARE (fc3) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2006 by Cisco Systems, Inc. Compiled Fri 13-Jan-06 20:37 by alnguyen Image text-base: 0x60011084, data-base: 0x61D00000 Cisco AS5350 (R7K) processor (revision T) with 131072K/65536K bytes of memory. Processor board ID JAE07510LQU R7000 CPU at 250MHz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache Last reset from warm-reset Manufacture Cookie Info: EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x32, Board Hardware Version 3.34, Item Number 800-5171-02, Board Revision C0, Serial Number JAE07510LQU, PLD/ISP Version 2.2, Manufacture Date 31-Dec-2003. Processor 0x14, MAC Address 000d.bd6d.777e Backplane HW Revision 1.0, Flash Type 5V 2 FastEthernet interfaces 6 Serial interfaces 60 terminal lines 2 Channelized E1/PRI ports 512K bytes of NVRAM. 32768K bytes of processor board System flash (Read/Write) 8192K bytes of processor board Boot flash (Read/Write) Building configuration... Press RETURN to get started! *Jan 1 00:00:02.683: %NP_VPD-6-SLOT_INSERTED: Slot 1 (60 ports max) inserted *Jan 1 00:00:02.727: %NP_MD-6-SLOT_INSERTED: Slot 1 (60 ports max) inserted *Jan 1 02:00:17: %SYS-6-CLOCKUPDATE: System clock has been updated from 00:00:17 UTC Sat Jan 1 2000 to 02:00:17 KHARKOV Sat Jan 1 2000, configured from console by console. *Jan 1 02:00:17: %SYS-6-CLOCKUPDATE: System clock has been updated from 02:00:17 KHARKOV Sat Jan 1 2000 to 02:00:17 KHARKOV Sat Jan 1 2000, configured from console by console. dial1>*Jan 1 02:00:17: %TRUNK_CLOCK-6-TRUNK: Switching to the trunk clock on slot 3 port 0 priority 1 *Jan 1 02:00:24: %SYS-5-CONFIG_I: Configured from memory by console *Jan 1 02:00:24: %NP_BS-6-MODULE_STARTED: NextPort module 1/0/0 Started - 6.27.10.31 *Jan 1 02:00:27: %SYS-5-RESTART: System restarted -- Cisco IOS Software, 5350 Software (C5350-IS-M), Version 12.4(5a), RELEASE SOFTWARE (fc3) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2006 by Cisco Systems, Inc. Compiled Fri 13-Jan-06 20:37 by alnguyen *Jan 1 02:00:27: %SNMP-5-COLDSTART: SNMP agent on host dial1 is undergoing a cold start *Jan 1 02:00:27: %SYS-6-BOOTTIME: Time taken to reboot after reload = 0 seconds *Jan 1 02:00:27: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 80.92.224.20 started - CLI initiated *Jan 1 02:00:28: %NP_BS-6-MODULE_STARTED: NextPort module 1/0/1 Started - 6.27.10.31 *Jan 1 02:00:32: %CONTROLLER-5-UPDOWN: Controller E1 3/0, changed state to up *Jan 1 02:00:32: %CSM-5-PRI: add PRI at slot 3, unit 0, channel 15 with index 0 *Jan 1 02:00:32: %CONTROLLER-5-UPDOWN: Controller E1 3/1, changed state to up *Jan 1 02:00:32: %CSM-5-PRI: add PRI at slot 3, unit 1, channel 15 with index 1 *Jan 1 02:00:33: %NP_VPD-6-MODULE_UP: NextPort module 1/0/0 up *Jan 1 02:00:33: %NP_MD-6-MODULE_UP: NextPort module 1/0/0 up *Jan 1 02:00:37: %NP_VPD-6-MODULE_UP: NextPort module 1/0/1 up *Jan 1 02:00:37: %NP_MD-6-MODULE_UP: NextPort module 1/0/1 up Грешу на память, но для того, чтобы ее поменять, надо быть уверенным в том, что после того, как мы ее поменяем, ВСЕ будет точно ОК. или возможно есть другие причины, по которым оно может себя так вести? Заранее очень благодарен. -- With best regards, Gregory Edigarov

3 6

Re: [uanog] апач
by Gregory Edigarov 01 Jul '08

01 Jul '08

Paul Arakelyan wrote: > On Tue, Jul 01, 2008 at 12:23:24PM +0300, Gregory Edigarov wrote: > >> Valentin Nechayev wrote: >> >>> Tue, Jul 01, 2008 at 12:03:13, greg wrote about "[uanog] апач": >>> >>> >>> >>>> Дано: >>>> FreeBSD-6.2, хостинг-jail >>>> apache 2.0.61 из портов, prefork >>>> php-4.4.7 из портов-же >>>> >>>> пых собран модулем. >>>> >>>> Имеем доставшие уже периодические падения апача. >>>> > А тупо сделать > while : > do > sleep немного > httpd -чего-тотам-чтоб-в-фореграунд-висело > done > и пусть падает... > попробовал, что-то каменный цветок не вышел. запускается только в единственном экземпляре, и на запросы не отвечает > Или супер-пупер-крутизна в виде двух апачей и nginx перед ними... > > Кстати, поставив что-то перед апачем можно будет легко узнать на чём > оно упало. Не так детально, как из коредампа, зато быстро. > > >>> Ну если падения - то почему не получать и не анализировать корки? >>> В них что-то разумное видно? >>> >>> >> Буду ковырять. я думал мож кто тут таки уже по этим граблям проехал... >> > А хостинг-jail - чей? может оно на лимиты какие наступает? > Вон, сквид в virtuozzo vps - ваще вешался на старте :) из-за такого. > и хостинг и jail - мои. лимиты я давно поубирал. -- With best regards, Gregory Edigarov

1 0

hacktivities
by Vladimir Litovka 27 Jun '08

27 Jun '08

http://vugluskr.mml.org.ua/~doka/Hacker%20Season-computerra_22_2008.pdf -- /doka

1 0

TransTelecom
by Volodymyr Yakovenko 26 Jun '08

26 Jun '08

Hello! А из Транстелекома тут ктото есть? -- Regards, Volodymyr. ╧╘Х┌f╒√)Ю√+-N┘'╡ФЛr╦⌡zг╖vf╒√з&j:+v┴╗╧╘Х┌H·╬Ф╟┼ьn·к⌡╠йБmК ·┬"·ь^n┤r║Шazg╛╠╗

8 11