Схема: link1 +--+---------------+--+ | | | | |R1| |R2| | | link2 | | +--+---------------+--+ R1 и R2 - freebsd+zebra+ospf link1 и link2 - бриджевые модемы Проблема в том, что по одному каналу ospfd находят друг друга, по другому - нет: ospf.R1> sh ip os nei Neighbor ID Pri State Dead Time Address Interface RXmtL RqstL DBsmL 10.0.60.14 1 Full/Backup 00:00:37 10.0.60.49 vlan9:10.0.60.50 0 0 0 10.0.60.14 1 Init/DROther 00:00:35 10.0.60.53 vlan10:10.0.60.54 0 0 0 ospf.R2> sh ip os nei Neighbor ID Pri State Dead Time Address Interface RXmtL RqstL DBsmL 10.0.60.41 1 Full/DR 00:00:40 10.0.60.50 vlan18:10.0.60.49 0 0 0 Конфиг R1: interface vlan9 ip ospf cost 10 ! interface vlan10 ip ospf cost 20 ! router ospf ospf router-id 10.0.60.41 redistribute connected network 10.0.60.48/30 area 2 network 10.0.60.52/30 area 2 Конфиг R2: interface vlan18 ip ospf cost 10 ! interface vlan19 ip ospf cost 20 ! router ospf ospf router-id 10.0.60.14 compatible rfc1583 redistribute connected metric-type 1 network 10.0.60.49/30 area 2 network 10.0.60.52/30 area 2 Где копать? -- Maxim Tulyuk WWW: http://www.primats.org.ua/~mt/ ICQ: 21134222 The bike is absolute freedom of moving =================================================================== uanog mailing list. To Unsubscribe: send mail to majordomo@uanog.kiev.ua with "unsubscribe uanog" in the body of the message