Привет! Что-то знакомое. Но точно не скажу. Помоему service compress-config поможет отцу русской демократии. -- WB, Maks Nefedchenko MNF4-RIPE On Tue, 22 Jul 2003, Valery V. Lunyov wrote:
Приветствую, коллеги!
Вот такая вот беда на 1721:
host#show startup-config %% Non-volatile configuration memory is being accessed, Try again later
Соответственно:
host#copy running-config startup-config Destination filename [startup-config]? startup-config file open failed (Not enough space)
Собственно вопросы:
1. Какова вероятность нормального ребута при таких симптомах?
2. Может кто поставит диагноз сразу?
host#sh ver Cisco Internetwork Operating System Software IOS (tm) C1700 Software (C1700-SY7-M), Version 12.2(8)T4, RELEASE SOFTWARE (fc1) TAC Support: http://www.cisco.com/tac Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Fri 03-May-02 22:41 by ccai Image text-base: 0x80008108, data-base: 0x80B6C730
ROM: System Bootstrap, Version 12.2(7r)XM1, RELEASE SOFTWARE (fc1) ROM: C1700 Software (C1700-Y7-M), Version 12.2(8)T1, RELEASE SOFTWARE (fc2)
Host uptime is 49 weeks, 5 days, 17 hours, 10 minutes System returned to ROM by power-on System image file is "flash:c1700-sy7-mz.122-8.T4.bin"
cisco 1721 (MPC860P) processor (revision 0x100) with 29492K/3276K bytes of memory. Processor board ID FOC060809XF (1123258888), with hardware revision 0000 MPC860P processor: part number 5, mask 2 Bridging software. X.25 software, Version 3.0.0. 1 FastEthernet/IEEE 802.3 interface(s) 2 Serial(sync/async) network interface(s) 32K bytes of non-volatile configuration memory. 16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
--- My Bests! Valery V. Lunyov VVL-RIPE
=================================================================== uanog mailing list. To Unsubscribe: send mail to majordomo@uanog.kiev.ua with "unsubscribe uanog" in the body of the message
=================================================================== uanog mailing list. To Unsubscribe: send mail to majordomo@uanog.kiev.ua with "unsubscribe uanog" in the body of the message