Hello Yury Yaroshevsky! Wed, Sep 26, 2007 at 12:40:41PM +0300, yk wrote about "[uanog] Overrun на Gi порту NPE-G1":
vxr#cle counters Clear "show interface" counters on all interfaces [confirm] vxr#sh int gi0/3 | inc clear Last clearing of "show interface" counters 00:02:07
а тут g0/3 а ниже g0/2
vxr#sh int gi0/2 | inc rate Queueing strategy: fifo 30 second input rate 241830000 bits/sec, 53281 packets/sec 30 second output rate 169701000 bits/sec, 50941 packets/sec vxr#sh int gi0/2 | inc over 0 input errors, 0 CRC, 0 frame, 363 overrun, 0 ignored vxr#sh controllers gi0/2 | inc rx_int Error Interrupts: rx_int_dscr = 0, rx_int_derr = 0, rx_int_drop = 252
По всем признакам:
overrun - Shows the number of times that the receiver hardware was incapable of handing received data to a hardware buffer because the input rate exceeded the receiver's capability to handle the data.
И это при нагрузке на интерфейсе не превышающей 30%. :((( CPU по форвардингу не вылазит на 50%
Что можно попытаться потюнить?
А там CEF по какой-то причине не отрубился случаем? CU! -- //ShaD0w =================================================================== uanog mailing list. To Unsubscribe: send mail to majordomo@uanog.kiev.ua with "unsubscribe uanog" in the body of the message