Alexey Balabushevich wrote:
Hello,
кто-либо пробовал ставить Фрю на материнку Intel S875WP1LX,
с интегрированным SATA RAID-контролером. Работает ?
Гугль ссылок набросал что вроде не работает.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p3 #10: Mon Mar 22 11:36:58 EET 2004
root@somewhere.com.ua:/usr/obj/usr/src/sys/UBIK
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0815000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0815294.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz (2593.51-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff
Hyperthreading: 2 logical CPUs
real memory = 1072889856 (1023 MB)
avail memory = 1032679424 (984 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <INTEL S875PWP4> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00f3d40
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 29 INTA is routed to irq 5
pcib0: slot 29 INTB is routed to irq 10
pcib0: slot 29 INTC is routed to irq 10
pcib0: slot 29 INTA is routed to irq 5
pcib0: slot 29 INTD is routed to irq 9
pcib0: slot 31 INTA is routed to irq 10
pcib0: slot 31 INTB is routed to irq 11
agp0: mem 0xf8000000-0xfbffffff at
device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 1 INTA is routed to irq 10
em0: port
0x9c00-0x9c1f mem 0xfc9e0000-0xfc9fffff irq 10 at device 1.0 on pci2
em0: Speed:N/A Duplex:N/A
uhci0: port 0xcc00-0xcc1f
irq 5 at device 29.0 on pci0
usb0: on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: port 0xd000-0xd01f
irq 10 at device 29.1 on pci0
usb1: on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: port 0xd400-0xd41f
irq 10 at device 29.2 on pci0
usb2: on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: port 0xd800-0xd81f
irq 5 at device 29.3 on pci0
usb3: on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: at device 29.7 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib3: slot 6 INTA is routed to irq 11
pcib3: slot 7 INTA is routed to irq 11
pcib3: slot 8 INTA is routed to irq 11
pci3: at device 6.0 (no driver attached)
atapci0: <Promise PDC20319 SATA150 controller> port
0xb000-0xb07f,0xb400-0xb40f,0xbc00-0xbc3f mem
0xfeaa0000-0xfeabffff,0xfeafe000-0xfeafefff irq 11 at device 7.0 on pci3
atapci0: [MPSAFE]
ata2: at 0xfeafe000 on atapci0
ata2: [MPSAFE]
ata3: at 0xfeafe000 on atapci0
ata3: [MPSAFE]
ata4: at 0xfeafe000 on atapci0
ata4: [MPSAFE]
ata5: at 0xfeafe000 on atapci0
ata5: [MPSAFE]
fxp0: port 0xac00-0xac3f mem
0xfeafd000-0xfeafdfff irq 11 at device 8.0 on pci3
fxp0: Ethernet address 00:0c:f1:a3:19:fe
miibus0: <MII bus> on fxp0
inphy0: on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port
0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
pci0: at device 31.2 (no driver attached)
pci0: at device 31.3 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
atkbdc0: port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
fdc0: port
0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: on ppbus0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2593512260 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
GEOM: create disk ad4 dp=0xc6b04760
ad4: 152627MB <SAMSUNG SP1614C> [310101/16/63] at ata2-master UDMA133
GEOM: create disk ad8 dp=0xc6b04460
ad8: 152627MB <SAMSUNG SP1614C> [310101/16/63] at ata4-master UDMA133
GEOM: create disk ar0 dp=0xc698bde0
ar0: 152587MB <ATA RAID1 array> [19452/255/63] status: READY subdisks:
disk0 READY on ad4 at ata2-master
disk1 READY on ad8 at ata4-master
Mounting root from ufs:/dev/ar0s1a
9
===================================================================
uanog mailing list.
To Unsubscribe: send mail to majordomo@uanog.kiev.ua
with "unsubscribe uanog" in the body of the message
